2 Pcs Stainless Steel Trim Strips 304 Brushed Stainless Steel Trim Metal Finishing Sheet Metal Gap Strip Filler Trim for Kitchen Tools (Silver, 2 x 30 Inch) - Amazon.com

The idea for this product was good enough but its just a plain piece of metal with no way to adhere it to anything and if you need to cut any of it or drill a hole through it, you'll quickly find that's basically impossible for a DIYer without an actual machine shop. I tried HSS drill bits. That failed. Then I tried dremel bits made for stainless steel. They broke. I gave up. Its not usable for me because of how damn strong it is.

I bought a new stainless steel dishwasher. It was just about a 1/2 inch smaller than the hole cut into the cabinets. It wasn't a huge gap but when you looked at the dishwasher from a certain angle, you could see the unfinished side of the bodh. I bought these and put a strip on each side of the dishwasher and they're perfect. I did note that there is no adhesive; I put it up with thin double sided tape and it's fine. I'm happy with these and it's just what I needed.

Used the 1” on top and 1.5” on the bottom of my warming drawer. Feel like it looks more finished with the trim. It does not come with adhesive. I thought it did, but probably got confused with another product. I just rolled up some painters tape to see if I liked the placement and it seems to be sticking well, so I probably will leave it as is until it starts coming loose.

The metal strips were finished just as described. The finished side was well-protected and had a great finish. The metal was stiffer than expected, but that was a good point. I thought it could be cut with shears but it was too hard and thick. I used an abrasive cut-off wheel instead.