Hammerite Rust Remover Gel Blister. Non Drip Rust Remover for Metal, Rust Converter - Non Damaging to Metal Paint, Suitable for Interior and Exterior - 100ml

I recently used the Hammerite Rust Remover Gel Blister and overall, I am quite satisfied with its performance. Here’s a detailed breakdown of my experience:#### Pros:1. **Non-Drip Formula**: The gel consistency is fantastic. It stays in place, making it easy to apply on vertical surfaces without any mess.2. **Effective on Light Rust**: It works well on lighter rust spots. After a couple of applications, the rust was completely gone, leaving the metal surface clean and ready for painting.3. **Versatile Use**: I appreciated that it can be used on both interior and exterior metal surfaces without damaging the paint. This makes it a versatile product for various projects around the house.#### Cons:1. **Brush Not Included**: One downside is that the product does not come with a brush, despite what some descriptions might suggest. Make sure to have a suitable brush on hand before starting your project.2. **Multiple Applications Needed**: For more stubborn rust spots, I found that multiple applications were necessary. This made the process a bit more time-consuming than I had anticipated.#### Overall Impression:The Hammerite Rust Remover Gel Blister is a reliable product for tackling minor rust issues. Its non-drip formula and versatility are definite advantages. However, be prepared for the need for multiple applications on tougher rust spots and ensure you have a brush ready. With these considerations in mind, I would recommend this product for anyone looking to address light to moderate rust problems effectively.I hope this review helps others make an informed decision!

I bought the gel instead of the milky liquid. The difference is night and day.You can over paint the milky stuff in a matter of minutes once it's gone black and dried. This green gel is about as much use as a chocolate fire guard it takes at least three hours to do what the other stuff did in 10 minutes.As an addition that my pack says that it comes with an integral brush that doesn't exist so I now need to buy a brush.Sadly for me it wasn't until I'd open the packet that I realized the error of my ways and so there's no way to send this back I've got a full tub of a very expensive built hamber product that's just as useless.Be careful when you're ordering this that you get the correct product otherwise you'll be buying it from Halfords because you need it in a hurry.Overall disappointing but it's absolutely down to me.It's a shame that the packs are almost identical to each other making it a very easy mistake just make sure you don't do the same as I did.

I feel like all the bad reviews are from people who haven’t followed the instructions. I had a decent chip on my car that started to rust. I bought this and followed the instructions, applied every 30 minutes for 3 hours and the rust had all disappeared. I think you just need to be persistent with it and don’t think it will work miracles after 20 minutes with 1 application.

This Hammerite Rust Remover Gel is excellent. If anyone is familiar with the industrial hand cleaner Swarfega, this gel looks exactly like that. It's a bright green gel that you can apply to horizontal or vertical surfaces with a detailing brush. You will need a 25mm (1 inch for our prehistoric American cousins) flat or round detailing brush. Anything larger will not fit through the bottle neck. You cover the rust with the gel. The bright green colour helps you identify where you have brushed it (unless your car is bright green of course). You then wait 20 minutes and see if the rust will brush or wipe off. I found that lighter rust stains would lift off after 20 minutes. The darker rust areas took 2 or three re-applications. You don't need to clean between re-applications. You just brush more of the gel onto those areas. I had purchased a pre-owned car. The car slowly started suffering from condensation. I traced the problem to a missing rubber drain plug in the bottom of the spare wheel well. By the time I discovered the problem, the bottom of the well had brown rust stains. Hammerite Rust Remover Gel sorted the problem beautifully, and most importantly, it did not damage the paint in the wheel well. It's not the fastest rust/rust stain remover. But it works. It's very controllable, and you don't waste any, because its applied by brush and not spray. I was removing rust stains from a painted surface. But if you are removing rust from bare metal, just remember that you will need to apply a rust inhibitor/WD-40/paint, straight after Hammerite Rust Remover Gel does its thing. As it is a remover, not a rust preventer.

Good product a little pricey butgood , only had just enough to do what I needed so keep that in mind !