VEVOR Milling Table 17.7×6.7Inch Compound Slide Milling Table Multifunction Worktable Cross Milling Machine Compound 2 Axis 4 Ways for All Drill Stands Bench Drilling Milling Machine
Фото покупателей 0
Динамика цены
Хотите узнать когда цена на этот товар снизится? Нажмите «Следить за ценой» и мы сообщим вам!
Характеристики
Описание
Premium Quality Structure: Built by heavy-duty cast iron material, which is anti-corrosion and rust resistance, angle milling table can withstand the tough environment and designed for long service time. Highly Polishing & Stiffenss: The compound slide table, with great hardness and stiffness, is high ground and not easy deformation. Three precise T-slots can meet different force requirements. 2 Axis 4 Ways Move: Handles with trapezoidal thread spindles is easy to adjust the directions. X-axis travel: 210 mm, Y-axis travel: 110 mm. With a precise scale on it, you can adjust the optimal working position as you need. Tightness Adjustment: Equipped with several quality bolts and nuts, you can easily adjust the tightness of this cross slide table. Convenient for your use. Wide Application: This milling working cross table machine is great for mounting on drilling machines for precise positioning. It can be used for most types of milling and drilling, ideal for all drill stands, drilling, and milling machines.
Отзывы о товаре 5
Фото покупателей 0
matt
Great milling table, I had an issue when it was delivered but a quick note to the supplier and they sorted it out very quickly. I would definitely use this company again
Iain
Good for the moneyA little patience required to set it up and you can get the accuracy to 0.01 mm takes a couple of hours to do though but apart from that it good
Mr S Beattie
Not top quality but good overall standard for the money. Everything fitted as it should but needed a bit of tinkering and adjustment. It works effectively and has a good degree of accuracy.
Carolann Burchnall
Wood and metal milling. Had to modify the wood ruff key to allow the wheel to fit.
D.P.
The slides are basicly good but need a bit of work. I scraped the machining marks out and scrapped the slides in. Also removed the sharp edges and the slides are great now. The cast iron is a bit on the soft side but it will be ok. I will add that I am a machine tool fitter machinist by trade.D.P.
Похожие товары
