Motorcycle Alarm Remote Control Keyless Control System 433.92MHz Motorcycle Immobilizer Burglar Alarm Motorcycle Security System

Description

Specification: Origin: Mainland China Certification: NONE Feature: Mute Anti-Theft,Security Alert Type Of Accessory: Special Parts Of Anti-Theft Device Voltage: 12V±2V Static current: less than 15mA Frequency: 433.92MHz Code: Learning code Distance: approx. 60-80m Remote control battery: CR2016 6V Scope of application: all 12V motorbikes, suitable for AC premiere models APP and remote control pairing: Open the Motorcycle APP and a prompt to turn on the Bluetooth-compatible switch on your phone appears. A green dot appears on the Bluetooth-compatible logo on the interface to indicate that Bluetooth-compatible is on. Click the gear-like icon in the top right corner of the interface to enter the settings interface. Press the pairing code learning key once, then press the remote control and both keys at the same time, the APP returns to the main interface from the settings interface. Press the button on the interface and the main unit will ring to indicate successful learning. (Note: When pairing the mobile phone APP, the remote control and the host are done within 5M distance) APP use: By clicking the buttons on the interface, all functions of the remote control can be achieved. No need to use mobile phone network, the control distance is about 30M effective. (Control may be different for different brands of mobile phones due to different Bluetooth-compatible versions) APP special functions: 1. Shake the switch lock: Open the mobile phone APP and click the gear-like icon at the top right corner of the interface to enter the setting interface. Shake the switch lock bar to prompt to select three levels of intensity, select the corresponding intensity, set up is complete and return to the main interface. By shaking the phone, the switch lock function is achieved. 2. Multi-share APP: Given the security requirements, the host only keeps one mobile phone information. However, the authorisation code can be shared to enable more than one family to use it. Open the mobile phone APP and click on the gear-like icon at the top right corner of the interface to enter the settings interface. Click on the authorisation code and a string of characters will appear, write down the characters. On the other mobile phone where this APP is installed, go to the settings screen and change the local authorisation code to that of the previous mobile phone to control the same vehicle. Note: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement.