TP-Link AC1900 WiFi Extender (RE550), Covers Up to 2800 Sq.ft and 35 Devices, 1900Mbps Dual Band Wireless Repeater, Internet Booster, Gigabit Ethernet Port : Amazon.ca: Electronics

The TP-Link AC1900 WiFi Extender (RE550) is an excellent solution for extending WiFi coverage in large homes. With coverage of up to 2800 sq. ft. and support for 35 devices, it delivers strong, reliable signals throughout my house, eliminating dead zones in previously weak areas. The dual-band speed of up to 1900Mbps ensures smooth streaming, gaming, and browsing without any noticeable lag or buffering, even when multiple devices are connected.The setup was straightforward thanks to the TP-Link Tether app, which guided me through the process quickly. The smart signal indicator was particularly helpful in finding the best spot to place the extender for optimal performance. The Gigabit Ethernet port is another standout feature, allowing for a wired connection to devices like my gaming console, which boosts speeds and reduces latency.Overall, the RE550 delivers on its promise of better WiFi coverage and improved performance. It’s a great investment for anyone looking to eliminate WiFi dead spots and ensure smooth connectivity across many devices.

Set up was fairly easy through the app.Works as advertised.....reception out on the backyard deck is far stronger.Extender was found to work bes5 if plugged in with8n 10 -12 feet of sotce.

Great unit, but be aware it's much larger than the wall receptacle it plugs into (it does stay securely plugged without sagging though).Setup was pretty straightforward, but make sure to enable EashMesh on the main router and turn off access control first (if enabled, you can turn it right back on after the extender setup is complete). The Tether app also makes it very easy to setup and manage (if you aren't familiar with using a web browser and IP address for management).Roaming is seamless between the main router and extender. There are no drop outs or back and forth hopping, it works as a mesh device should. Speed is excellent, with solid coverage on the 5/6 GHz channels (which don't get the range of 2.4 through walls/obstacles).It's definitely on the expensive side, but it is Wi-Fi 7 certified (MLO, MRU, 4K-QAM, etc.). If you don't have a Wi-Fi 7 router and/or devices you will not see the benefits of this extender.Overall, it's a solid unit if your network supports it.

I have been using another Extender for a couple of years now, it works, but I the connection is not always stable or available for devices I need to connect outside, but it works 85% of the time. And I always have doubts or cannot always trust the extender always feed coverage / signal connections. I have tried 2 other products of extenders but they worked pretty much the same. That is why I thought...well, it's probably my problem how everything is constructed and lay out in regards to the areas I need to use this extender. So I have given up in trying to find something better because I think it's going to be pretty much the same results.So last week I finally decided to give another chance to look for a better Extender, I found this, but at first I didn't have much high hope, I would just try it and then refund it if the performance is not what I expected. But to my surprise, the signal is so much stronger providing VERY stable and solid connections ! Now I feel 100% with this extender providing solid connection, I can see my devices loading faster, and not drops at all, everything just work so much better now. Very happy. Now in my case, I'm not so much concerned about "dead zones" is more like I need a solid connection to where I need to use it and this extender performed just that, a solid connection. My internet connect is pretty solid so if the extender can extend it, then everything will be fine, again, this extender did a solid job in extending connection. I'm sure this extender can always broadcast a very long range of connection to help reduce dead zones/spots.Oh, in terms of installation/setup, I do recommend to use the "Tether" app to setup. It's easier for most users. But if you have experience with extenders, you can always connect to the extender network and use a browser (i.e. your phone, iPad, or even a computer) to configure and setup the extender. For me, I used the Tether app to setup the Extender, and I used the Tether app to check status of the extender but the browser offers you more options in settings (i.e. changing wifi passwords - you cannot do that with the Tether app). The instructions are all there in the piece of paper and it's not long so don't need to be scared, it's pretty easy. Just follow what it says. And basically you can just setup/configure using the Tether app but the app is 80 Mb so I might delete it and just connect to the extender and configure / monitor from a browser going forward (just need to save the URL on my browser)If you want to use the Tether to setup/configure this extender you will need (do it before you setup the extender):1. Create a d-link account (very easy, just need an email and create a password)2. Have a Password Handy for your Extender - make 1 up (You need to create a login password to your Extender - You don't want everyone to be able to connect to your Extender and mess things up right?) - you will still need this even if you don't use a Tether app to setup your extender.3. Have your WIFI password ready (the password of the WIFI connection that you want the extender to use). If you are connecting your extender to your router/modem directly with a cable, you do not need this but I think most people are trying to extender their WIFI connections wirelessly.Worth every penny imo, I got this on sale for $60 CDN tax. . 5 Stars product. Good Luck and hope this extender will be the last one you need for years to come.