OVERTURE PC Professional Filament, Cardboard Spool, 1kg(2.2lbs), Dimensional Accuracy Probability +/- 0.02mm, Fit Most FDM Printer (Transparent)
Фото покупателей 0
Динамика цены
Хотите узнать когда цена на этот товар снизится? Нажмите «Следить за ценой» и мы сообщим вам!
Характеристики
Описание
【Anti-warping】Our PC filament makes the material more suitable for 3D printing through fine adjustment of the glass transition temperature. Its glass transition temperature is 113 °C, which is lower than the glass transition temperature (140 °C) of ordinary PC wire, and the residence time from the printing temperature to the glass transition temperature is longer, so there are more sufficient Time to release the internal stress of the material, thereby reducing the possibility of warping 【Professional】PC Filament is a professional-grade material, which requires a closed printing chamber to print, and its printability is more difficult than ABS and PETG 【Application】PC Filament is the second largest category of engineering plastics in the world (the largest is nylon). After modification, it has particularly good impact resistance, thermal stability, gloss and flame retardancy, and has a wide temperature range (-60~120 ℃), widely used in the design of electronic product casings, especially products that require outdoor use, such as: lampshades, mobile phone cases, trash cans, etc 【Easy to Print】PC Filament transparent color, with good printability, stiffness and heat resistance and light diffusion characteristics. On the basis of PC (transparent color), other color PC filaments with excellent toughening properties have been obtained by using nano-material technology 【LIFE-TIME GUARANTEE】No matter when or why you need to replace or refund we will help! No risk to give us a chance to prove us, overture, are your reliable 3d filaments /accessories/3d printer/3d pen supplier
Отзывы о товаре 3
Фото покупателей 0
Jonathan
This PC filament was easy to work with on my Bambu Labs X1 Carbon. Using the stock settings from Bambu worked well enough to begin with. But it gets even better once calibrated. Once I got the flow ration and pressure advance dialed in, I tested the max flow rate, and it achieved 26mm^3/s with a stock 0.4mm nozzle. I dialed it back to 24mm^3/s and have been doing some non-stop printing since. I haven't had issues with adhesion or warping. I print without brims or rafts, using a smooth PEI plate with the thinnest glue (mix of glue stick, water and alcohol) as a barrier/adhesion booster. I'm not seeing any issues with warping, and my prints come out immaculate.The only draw back is the cardboard spool as used in the AMS. Which is why I'm using the filament to create a re-spooler so I can use this same stuff over and over again. I can't wait to grab more filament.
Cameron B
Admittedly I have no reference for comparison as this is the only roll of PC I have tried so far. But zero issues after using about 90% of the roll. All parts have been warp free, with no stringing (I do dry for about 8 hrs before printing). Plate adhesion for Bambu Lab X1C textured PEI sheet has been great as has the Engineering Plate.With the roll almost used up, I will be ordering another.
Michael T.
Needed something that could withstand 200f without losing strength. This does. Still maintained strength at 200f in the oven, long after my PETG part melted.Seems very brittle and would probably print better at 260-270, but my printer can't go over 250 :(Does break along layer line seams when it fractures, but still pretty strong.Again.... probably 260-270 is optimal and would hold layer lines better.